常見問題
The iQsquare power meter pedal is equipped with a thin film strain gauge and a load cell. The strain gauge is directly deposited on the axle and is molecularly bonded to the surface. This is a highly accurate and fully automated process which results in absolutely identical power meters during production.
A single-sided power meter pedal measures the power produced by one leg and multiplies the measurement by two. This is a good solution for your budget, however it is very common to have a difference in produced power between the left and right leg, which lies in the range of 5 - 20% and results in a large measurement error. This measurement fault is not so important when comparing your own results, but comparing power data with other riders can be misleading.
Therefore, it is recommended to use a power meter pedal set for a precise measurement.
We're currently in production. We now have the following shipping schedule.
For Left only 60pcs December 2022, 380pcs in early April 2023, 120pcs at end April 2023 more info on the dual sided and MTB will follow.
- Total power
- Left/right balance (when using power meter pedal set)
- Torque effectiveness
- Pedal smoothness
- Cadence
Yes, the weight limit is 120 kg / 265 lb.
No.
The CR2032 Lithium coin cell has a battery life of up to 80 hours.
The iQsquare pedal power meter is compatible with all bikes. We offer specifically designed pedals for both road and mountain bikes, which can also be used for track and triathlon.
The power meter pedals connect through both ANT+ and Bluetooth to all bike computers and sports apps. See our list of 'Compatible Devices' in the dropdown menu under Products.
When installing the iQsquare power meter for the first time on your bike, our configuration app (available for Android and iOS) helps you set up your power meter step by step.